What To Know
- If the input signal you want is not available, you may need to use a different input on your monitor or on your computer.
- Once the input signal you want is selected, you may need to adjust the display settings on your monitor to match the input signal.
- The exact steps for changing the input signal on your AOC monitor may vary depending on the model of monitor you have.
The AOC monitor is a great device, but it’s frustrating when it won’t display the input. If you’re finding your AOC monitor showing “input not supported,” there are a few things you can try to fix the problem. In this article, we’ll walk you through the steps to troubleshoot and fix the issue.
Aoc Monitor Showing Input Not Supported
Input not supported error on AOC monitor occurs when the connection between your monitor and the computer or laptop is not correct. This can happen due to various reasons such as a loose connection, incompatible cable, or incorrect input source selected in the monitor settings.
To fix this issue, follow these steps:
1. Check the connection: Make sure the connection between the monitor and the computer is secure. Disconnect and reconnect the cables to ensure they are properly connected.
2. Use the correct cable: Some AOC monitors require a specific type of cable for optimal performance. Check the specifications of your monitor and use the appropriate cable.
3. Select the correct input source: Most AOC monitors have multiple input sources, such as HDMI, DisplayPort, and VGA. Make sure the input source selected in the monitor settings matches the input source you are using.
4. Update the monitor’s firmware: Sometimes, an outdated firmware can cause the “input not supported” error. Visit the AOC website and download the latest firmware update for your monitor. Install it following the instructions provided.
5. Try a different computer: Connect the monitor to a different computer or laptop and see if the error persists. This will help you determine if the issue lies with the monitor or the computer.
6. Contact AOC support: If none of the above solutions work, contact AOC customer support for assistance. They may be able to assist you further in diagnosing and resolving the issue.
By following these steps, you should be able to fix the “input not supported” error on your AOC monitor.
What Input Modes Does My Aoc Monitor Support?
There are three types of input modes that an AOC monitor supports: VGA, DVI, and HDMI.
VGA is the oldest type of input mode and is commonly used for connecting a computer to a monitor. The VGA input mode supports resolutions up to 1920 x 1080 pixels.
DVI is an improved version of VGA and is commonly used for connecting a computer to a monitor. The DVI input mode supports resolutions up to 2560 x 1600 pixels.
HDMI is the most modern type of input mode and is commonly used for connecting a computer to a monitor. The HDMI input mode supports resolutions up to 4096 x 2160 pixels.
It is important to choose the right input mode for your AOC monitor in order to maximize its performance.
How Do I Change The Input Signal On My Aoc Monitor?
To change the input signal on your AOC monitor, follow these steps:
1. Locate the input selection button on your monitor. This button is usually located on the back of the monitor, and may be labeled “Input,” “Source,” or “PC.”
2. Press the input selection button to cycle through the available input signals. Continue pressing the button until the input signal you want is displayed on the screen.
3. If the input signal you want is not available, you may need to use a different input on your monitor or on your computer.
4. Once the input signal you want is selected, you may need to adjust the display settings on your monitor to match the input signal. This may involve adjusting the brightness, contrast, and other display settings.
5. Once the input signal and display settings are adjusted, your monitor should be ready to use.
Note: The exact steps for changing the input signal on your AOC monitor may vary depending on the model of monitor you have. Consult the user manual that came with your monitor for detailed instructions specific to your model.
Summary
If you’re wondering why your AOC monitor is showing “input not supported,” you’re not alone. Many users have reported this issue, and it can cause a lot of problems. In this blog post, we’ll help you troubleshoot the problem and find a solution.
