What To Know
- If the scale still doesn’t work after cleaning and reinstalling the battery, try replacing the battery with a new one.
- If your Fitbit Aria stops working after a battery change, there are a few steps you can take to troubleshoot the issue.
- Connect the new battery connector to the circuit board, then insert the battery into the battery compartment.
The Fitbit Aria 2 is a smart scale that allows you to track your weight, body fat percentage, and more. It’s a great way to stay motivated and on track with your weight loss goals.
But sometimes, the Aria 2 may not work properly. One of the most common issues is that the scale won’t turn on after you’ve changed the battery.
Fitbit Aria Not Working After Battery Change
The Fitbit Aria 2 smart scale is not working properly after changing the battery. This could be due to several factors, such as incorrect battery installation, damaged battery contacts, or faulty hardware.
To troubleshoot the issue, try the following steps:
1. Check the installation: Make sure that the battery is installed correctly. The positive (+) side of the battery should be facing up, and the negative (-) side should be facing down.
2. Clean the battery contacts: Use a cotton swab or soft cloth to remove any dirt or debris from the battery contacts.
3. Replace the battery: If the scale still doesn’t work after cleaning and reinstalling the battery, try replacing the battery with a new one.
4. Reset the scale: Press and hold the scale’s power button for 10 seconds, until the display turns off. Then press the power button again to turn the scale back on.
5. Check the firmware: Ensure that the scale is running the latest version of the firmware. You can check for updates on the Fitbit website or app.
6. Contact Fitbit: If none of the above steps work, contact Fitbit customer support for assistance. They may be able to assist you with troubleshooting or replacing the scale.
Remember, the Fitbit Aria 2 scale is designed to last for several years on a single battery. If you’re experiencing frequent issues with battery life, you may want to consider replacing your scale.
How Long Does A Fitbit Aria Battery Typically Last?
- * Battery life depends on usage and environmental factors
- * Low battery indicator will flash when battery is low
- * Battery is user-replaceable
- * Battery life may be extended by turning off the wifi when not in use
What Steps Should I Take If My Fitbit Aria Stops Working After A Battery Change?
If your Fitbit Aria stops working after a battery change, there are a few steps you can take to troubleshoot the issue. First, make sure that the Aria is plugged in and charging. If the Aria is not charging, try using a different USB port or wall outlet. If the Aria still does not charge, you may need to contact Fitbit for further assistance.
If the Aria is charging but still not working, you can try resetting the device. To do this, press and hold the button on the Aria for 10 seconds. After the Aria resets, try pairing it again with your smartphone.
If the Aria still does not work after trying these steps, you may need to contact Fitbit for further assistance. They may be able to help you troubleshoot the issue or replace your Aria.
How Do I Properly Insert A New Battery Into My Fitbit Aria?
To insert a new battery into your Fitbit Aria, follow these steps:
1. Remove the old battery: Use a Phillips-head screwdriver to remove the four screws on the back of the Aria. Gently pull apart the two halves of the case, being careful not to damage the circuit board inside. Disconnect the battery connector from the circuit board.
2. Insert the new battery: Connect the new battery connector to the circuit board, then insert the battery into the battery compartment. Make sure that the positive (+) side of the battery is facing up.
3. Replace the case: Replace the two halves of the case, making sure that the screws are securely in place.
4. Test the Aria: Connect the Aria to its charger and wait for it to turn on. If the Aria does not turn on, try inserting the battery again.
It is important to use the correct battery for your Fitbit Aria. The Aria uses a standard CR2025 battery, which can be purchased at most electronics stores.
It is also a good idea to replace the battery regularly, especially if you have not used the Aria in a while. A dead battery can cause the Aria to malfunction or not work properly.
Are There Any Troubleshooting Tips Or Tricks To Get My Fitbit Aria Working Again?
If your Fitbit Aria is not working properly, there are a few troubleshooting steps you can take to try and get it working again. First, make sure that your Aria is plugged in and that the green light is on. If the green light is not on, the Aria may not be receiving power.
Next, check to see if the Aria is properly connected to your home Wi-Fi network. To do this, open the Fitbit app and go to the “Account” tab. From there, select ” Aria Wi-Fi Smart Scale.” The app will display the name of your Wi-Fi network. Make sure that the network name is correct and that the Aria is connected to it.
If the Aria is connected to your Wi-Fi network, but is still not working properly, you can try restarting the Aria. To do this, unplug the Aria from the power outlet, wait a few seconds, and then plug it back in. Once the Aria has restarted, try using it and see if the problem is resolved.
If restarting the Aria does not fix the problem, you can try resetting the Aria to its factory settings. To do this, open the Fitbit app and go to the “Account” tab. From there, select ” Aria Wi-Fi Smart Scale.” Tap the gear icon in the top right corner of the screen, and then tap “Factory Reset.” This will reset the Aria to its default settings, which may help to fix any issues that are preventing it from working properly.
What Is The Fitbit Aria Warranty Policy And How Do I Make A Warranty Claim?
The Fitbit Aria (also known as the Aria 2) is a Wi-Fi smart scale that measures weight, body fat percentage, and BMI. It has a warranty period of one year from the date of purchase.
To make a warranty claim, you will need to contact Fitbit customer service. You can reach them by phone at (877) 623-4997 or by email at support@fitbit.com. You will need to provide proof of purchase and a description of the problem you are experiencing.
It is important to note that the warranty does not cover damage caused by misuse, accidents, or unauthorized modifications. Additionally, the warranty is only valid in the country in which the product was purchased.
If you are outside of the warranty period, you may want to consider purchasing an extended warranty. Fitbit offers extended warranty plans for an additional fee. These plans can be purchased through Fitbit’s website or through authorized retailers.
In a nutshell
If you’re experiencing issues with your Fitbit Aria not working after changing the battery, don’t worry, you’re not alone. Many users have reported similar issues and there are several possible fixes that you can try. First, make sure that you have followed the correct battery replacement procedure. If that doesn’t work, try resetting your Fitbit Aria and pairing it again. If that doesn’t work, there’s one last thing you can try: checking the battery contacts for debris or corrosion. Clean the contacts with a cotton swab dipped in rubbing alcohol, and then try again. If none of these solutions work, you may need to contact Fitbit support for further assistance.
