Fix Your Fitbit Blaze Not Turning On Issue in 5 Easy Steps!

Is your Fitbit Blaze not turning on? If so, you’re not alone. Many users have reported problems with their Fitbit Blaze not turning on. In this article, I’ll explain why your Fitbit Blaze might not be turning on and what you can do to fix the problem.

Fitbit Blaze Not Turning On

So, you have a Fitbit Blaze and it won’t turn on. But don’t worry, we’ve got some troubleshooting tips that should help.

First, try pressing and holding the power button for 10 seconds. This should restart your Fitbit Blaze. If that doesn’t work, try charging your Fitbit Blaze. A low battery can prevent it from turning on.

If it still won’t turn on, you can try a hard reset. To do this, press and hold the power button and the button on the right of your Fitbit Blaze for 10 seconds. This will restart your Fitbit Blaze.

If none of these steps work, you may need to contact Fitbit support for further assistance.

What Should I Do If My Fitbit Blaze Won’t Turn On?

• 1. Charge your Fitbit Blaze: If the device is low on battery, it may not turn on. Plug the charging cable into the USB port on your computer or any UL-certified USB wall charger.
• 2. Restart your Fitbit Blaze: Press and hold the side button until you see the Fitbit logo on the screen.
• 3. Check the charging cable: Make sure it is firmly plugged into the USB port on your computer or wall charger.
• 4. Try a different USB port: If you are using a computer, try plugging the charging cable into a different USB port.
• 5. Contact Fitbit Support: If none of the above solutions work, you may need to contact Fitbit Support for further assistance.

How Can I Troubleshoot My Fitbit Blaze If It Won’t Turn On?

When your Fitbit Blaze won’t turn on, there are several steps you can take to troubleshoot the issue.

1. Check the charge: Make sure the Fitbit Blaze is charging properly. If it’s not charging, try a different charging cable or USB port.

2. Try a hard reset: Press and hold the side button for 10 seconds, then release. If the Fitbit Blaze still doesn’t turn on, try resetting it again.

3. Check for firmware updates: If the Fitbit Blaze is up to date, try restarting it. If it still doesn’t turn on, you may need to contact Fitbit support for further assistance.

4. Check the Fitbit app: Make sure your Fitbit app is up to date and that it’s connected to your Fitbit Blaze. If the app isn’t connected, try reconnecting it.

5. Check the Fitbit Blaze’s settings: Make sure the Fitbit Blaze is set to the correct time zone and that it’s connected to your phone. If it’s not connected, try reconnecting it.

If none of these steps work, you may need to contact Fitbit support for further assistance.

What Are The Common Causes Of A Fitbit Blaze That Won’t Turn On?

A Fitbit Blaze that won’t turn on can be caused by a variety of issues. Here are a few common causes:

1. Battery issue: One of the most common causes of a Fitbit Blaze that won’t turn on is a drained battery. If your Blaze has been sitting unused for a while, the battery may have drained to the point where it can no longer power the device. To fix this, you’ll need to charge your Blaze.

2. Hardware issue: In some cases, a hardware issue may be to blame for a Blaze that won’t turn on. For example, the charging port may be damaged, preventing the Blaze from charging properly. In this case, you may need to contact Fitbit for repair or replacement.

3. Software issue: A software issue could also be to blame. For example, the Blaze may be stuck in a boot loop, where the device attempts to turn on and then immediately turns off again. In this case, you may need to perform a factory reset or reinstall the Blaze’s software.

If your Blaze still won’t turn on after trying these solutions, you may need to contact Fitbit for further assistance.

How Do I Reset My Fitbit Blaze If It Won’t Turn On?

To reset your Fitbit Blaze if it won’t turn on, follow these steps:

1. Press and hold the button on your Fitbit Blaze for 10 seconds.

2. After 10 seconds, release the button.

3. Your Fitbit Blaze should now be reset and will turn on.

If these steps don‘t work, you can try charging your Fitbit Blaze for 10 minutes and then trying the reset process again.

Note: Resetting your Fitbit Blaze will erase all of your data and settings. Be sure to sync your Fitbit Blaze with your phone or computer before resetting it, so you can back up your data.

Should I Contact Fitbit If My Blaze Won’t Turn On?

If your Fitbit Blaze won’t turn on, there are a few troubleshooting steps you can take before contacting Fitbit for further assistance.

First, make sure that your Blaze is fully charged. If the battery is dead, it may not turn on. To charge your Blaze, connect it to a power source using the charging cable.

If the battery is charged and your Blaze still won’t turn on, try restarting it. To do this, press and hold the button on your Blaze for 10 seconds. After restarting, your Blaze should turn on.

If restarting your Blaze doesn’t work, try resetting it. To do this, press and hold the button on your Blaze for 15 seconds. After resetting, your Blaze should turn on.

If none of these steps work, it’s possible that there may be a problem with your Blaze. In this case, you should contact Fitbit for further assistance. They may be able to assist you further or replace your device if necessary.

Overall, if your Fitbit Blaze won’t turn on, it’s always a good idea to try these troubleshooting steps before contacting Fitbit.

Key Points

If you’re having trouble with your Fitbit Blaze not turning on, there are a few troubleshooting steps you can take. First, try plugging the device into a power outlet and charging it for at least 30 minutes. If that doesn’t work, try resetting the device by holding down the side button for 10 seconds. If neither of those solutions work, the device may need to be serviced by Fitbit.