What To Know
- When your Fitbit Blaze doesn’t charge, it’s either due to a faulty charger, a damaged USB port, or a drained battery.
- If the charger works in a different port, there may be a problem with the port your Blaze was plugged into.
- Press and hold the button on your Fitbit Blaze until you see the Fitbit logo on the screen.
Fitbit Blaze is the go-to fitness tracker for millions of people, but what happens when it stops charging? If you’re finding your Fitbit Blaze not charging, don’t panic! There are a few simple steps you can take to troubleshoot the issue and get your tracker back up and running.
Fitbit Blaze Stopped Charging
When your Fitbit Blaze doesn’t charge, it’s either due to a faulty charger, a damaged USB port, or a drained battery. To fix the problem, you’ll need to try different solutions until you find the one that works.
1. Check your charger: Make sure your charger is plugged into a working outlet. If it’s plugged into a power strip, make sure it’s turned on. If the charger doesn‘t seem to be working, try a different one.
2. Check the USB port: Try plugging your charger into a different USB port. If the charger works in a different port, there may be a problem with the port your Blaze was plugged into.
3. Charge your Blaze: If your Blaze won‘t charge, try leaving it plugged in for a few hours. Sometimes, the battery is just drained and needs time to recharge.
4. Restart your Blaze: Press and hold the button on your Blaze for 10 seconds. This will restart your Blaze and clear any glitches that may be causing it to not charge.
5. Reset your Blaze: Press and hold the button on your Blaze for 10 seconds. Then, release the button and press and hold it again for 10 seconds. This will reset your Blaze to its factory settings.
6. Check the charger cable: Make sure the charger cable is securely connected to your Blaze and to the charger. If the cable is damaged, it may not be charging your Blaze properly.
7. Contact Fitbit: If none of these solutions work, you may need to contact Fitbit for further assistance.
Why Is My Fitbit Blaze Not Charging?
- 1. Make sure your Fitbit Blaze is clean and free of debris.
- 2. Try a different charging cable and USB port.
- 3. Try a different wall outlet.
- 4. Try a different charger.
- 5. Try resetting your Fitbit Blaze.
How Do I Troubleshoot My Fitbit Blaze Not Charging?
Your Fitbit Blaze not charging? Don’t panic, take a deep breath, and follow these steps to figure out why.
Check the USB Charger
Check the USB charger that came with your Fitbit Blaze, is it plugged in? Is it connected to power? Try plugging the charger into a different outlet.
Check the Charging Clip
Is the charging clip clipped firmly in place? It should be firmly seated on the back of your Fitbit Blaze.
Restart Your Fitbit Blaze
Sometimes restarting your Fitbit Blaze can resolve charging issues. Press and hold the side button until you see the Fitbit logo and the tracker vibrates.
Update Your Fitbit App
Make sure your Fitbit app is up to date. Open the Fitbit app and tap the Account icon > your device image > Update Tracker Software.
Clear the Cache
Clearing the cache on your Fitbit Blaze can resolve charging issues. Press and hold the side button until you see the Fitbit logo and the tracker vibrates > tap the screen 10 times > tap the screen 10 times again.
Reset Your Fitbit Blaze
Resetting your Fitbit Blaze is a last resort, but it may resolve charging issues. Press and hold the side button until you see the Fitbit logo and the tracker vibrates > tap the screen 10 times > tap the screen 10 times again.
Conclusion
If your Fitbit Blaze still won’t charge, contact Fitbit Support for further assistance.
How Do I Clean My Fitbit Blaze Charging Port?
To clean your Fitbit Blaze charging port, you can use the following steps:
1. Turn off your Fitbit Blaze: Press and hold the button on your Fitbit Blaze until you see the Fitbit logo on the screen.
2. Remove the strap: Unclip the strap from your Fitbit Blaze by pulling it away from the device.
3. Use a cotton swab: Take a cotton swab and dampen it with rubbing alcohol. Gently rub the cotton swab over the charging port to remove any dirt or debris.
4. Dry the charging port: Use a clean, dry cotton swab to remove any excess moisture from the charging port.
5. Reattach the strap: Clip the strap back into place on your Fitbit Blaze.
6. Turn on your Fitbit Blaze: Press and hold the button on your Fitbit Blaze until you see the Fitbit logo on the screen.
Note: If your Fitbit Blaze still won’t charge after cleaning the charging port, you may need to contact Fitbit support for further assistance.
How Do I Replace The Charging Cable On My Fitbit Blaze?
To replace the charging cable on your Fitbit Blaze, you’ll need to purchase a charging cable that is compatible with your device. You can find these cables online or at most major electronics retailers.
Once you have a new charging cable, follow these steps to replace it:
1. Turn off your Fitbit Blaze by pressing and holding the side button until the screen turns off.
2. Locate the charging port on your Fitbit Blaze. It’s located on the back of the device, near the bottom.
3. Gently insert the tip of the charging cable into the charging port. Make sure the cable is securely inserted.
4. Connect the other end of the charging cable to a power source, such as a computer USB port or a wall charger.
5. Wait for your device to charge. The charging icon will appear on the Fitbit Blaze’s display when the device is charging.
6. When the device is fully charged, disconnect the charging cable from the power source and your Fitbit Blaze.
It’s important to use the official charging cable that came with your Fitbit Blaze, or one specifically designed for your device. Using an incompatible charging cable can damage your Fitbit Blaze or cause it to malfunction.
How Do I Check The Battery Life Of My Fitbit Blaze?
To check the battery life of your Fitbit Blaze, follow these steps:
1. Swipe up from the home screen to open the dashboard.
2. Swipe left to the “Notifications” panel.
3. Swipe down to the bottom of the “Notifications” panel.
4. The battery life of your Fitbit Blaze will be displayed as a small battery icon.
5. Tap on the battery icon to open the “Battery” screen.
6. The “Battery” screen will show you the remaining battery life as a percentage of full charge, as well as the estimated time remaining until the battery is depleted.
7. You can also check the battery level by opening the “Settings” app on your Fitbit Blaze and selecting the “Battery” option.
Note: The battery life of your Fitbit Blaze will depend on a variety of factors, including how often you use it, the number of notifications you receive, and the intensity of the activities you track.
Final Note
In conclusion, if your Fitbit Blaze isn’t charging, there are several steps you can take to try and fix the problem. First, make sure that the charging cable and USB port are functioning properly. If everything looks okay, try restarting your Fitbit Blaze. If that doesn’t work, try a different charging cable or USB port. If none of these solutions work, it’s possible that there’s a problem with your Fitbit Blaze. In this case, you’ll need to contact Fitbit support for further assistance.
