What To Know
- To do this, press and hold the side button and the down button at the same time until the Fitbit logo appears.
- If the water lock icon is still on the screen after a few seconds, you may need to press the button again.
- It’s designed to protect the screen from turning on while you’re in the water, but it won’t protect the device from water damage.
If you’re anything like me, you rely on your Fitbit Inspire 2 to keep on top of your daily fitness goals. So when yours gets stuck on water lock, it can really throw a wrench in your plans. But don’t despair! There are a few things you can try to get it unstuck and back on track.
Fitbit Inspire 2 Stuck On Water Lock
The Fitbit Inspire 2 is an affordable fitness tracker that is perfect for beginners. However, it can sometimes get stuck in the water lock mode. This can be frustrating, but there are a few things you can do to try and fix the problem.
First, make sure that your Inspire 2 is completely dry. If it is still wet, the water lock mode may be activated. You can try drying it with a soft cloth or letting it air dry.
If the Inspire 2 is still stuck in the water lock mode, you can try restarting it. To do this, press and hold the side button until the screen turns off. Then, press and hold the side button again until the Fitbit logo appears.
If you are still having trouble, you can try resetting your Inspire 2. To do this, press and hold the side button and the down button at the same time until the Fitbit logo appears. Then, release both buttons.
Finally, if none of these solutions work, you may need to contact Fitbit customer service for further assistance. They may be able to walk you through additional troubleshooting steps or help you replace your Inspire 2.
How Do I Turn Off Water Lock On My Fitbit Inspire 2?
- 1. Press and hold the button on your tracker for 3 seconds.
- 2. Swipe up on the screen of your tracker.
- 3. Tap “Water Lock“.
- 4. Swipe right on the screen of your tracker.
- 5. Tap “End”.
How Long Does It Take For The Water Lock To Turn Off On My Fitbit Inspire 2?
Are you wondering how long the water lock on your Fitbit Inspire 2 will stay on? Or how to turn it off?
When the water lock is turned on, it helps prevent the screen from turning on while you’re swimming or washing your hands. This can be useful if you’re worried about accidentally pressing any buttons while you’re in the water.
However, if you’re done with your swim or washing your hands, you’ll want to know how to turn off the water lock. Here’s how to do it:
1. Press the button on your Inspire 2.
2. Rotate the button until the screen turns on.
3. Press the button again.
4. Rotate the button until the water lock icon disappears.
That’s it! The water lock should now be turned off.
Keep in mind that it may take a few seconds for the water lock to turn off. If the water lock icon is still on the screen after a few seconds, you may need to press the button again.
Also, keep in mind that the water lock is not a replacement for a waterproof case. It’s designed to protect the screen from turning on while you’re in the water, but it won’t protect the device from water damage. If you want to go swimming with your Inspire 2, it’s best to use a waterproof case.
Why Won’t My Fitbit Inspire 2 Turn Off Water Lock?
Water lock is a feature on Fitbit Inspire 2 that prevents accidental touches while the device is wet. It can be turned on by swiping up from the clock face or by pressing and holding the left side button. To turn off the water lock, simply press and hold the left side button until the screen turns off.
If your Fitbit Inspire 2 is not turning off the water lock, there may be a few reasons for this. One possibility is that the device is low on battery and needs to be charged. To charge your Fitbit Inspire 2, connect it to a charger using the charging cable that came with the device.
Another possibility is that there may be water inside the device that needs to be dried out. To do this, you can follow these steps:
1. Remove the band and tracker from your wrist.
2. Dry the tracker and band thoroughly with a soft cloth.
3. Place the tracker and band on a clean, dry surface and leave them to air dry for at least 12 hours.
4. After 12 hours, reattach the tracker to the band and try turning on the water lock again.
If these steps do not resolve the issue, it may be a problem with the device itself. In this case, you should contact Fitbit support for further assistance.
How Do I Restart My Fitbit Inspire 2 If It’s Stuck On Water Lock?
To restart your Fitbit Inspire 2 if it’s stuck on water lock, follow these steps:
1. Press and hold the button on your Inspire 2 for 10 seconds.
2. After 10 seconds, release the button.
3. Your Inspire 2 should now be restarting.
If the above steps don‘t work, you can try the following:
3. Press and hold the button on your Inspire 2 for 10 seconds.
4. After 10 seconds, release the button.
5. Your Inspire 2 should now be restarting.
If these steps still don’t work, you may need to contact Fitbit support for further assistance.
How Do I Clean My Fitbit Inspire 2 If It’s Stuck On Water Lock?
To clean your Fitbit Inspire 2 if it’s stuck on water lock, follow these steps:
1. Remove the band: Gently pull the band away from the tracker until it pops off.
2. Dry the tracker: Use a soft, lint-free cloth to gently dry the tracker. Don’t use any solvents, abrasives, or chemicals, as these can damage the tracker.
3. Check the charging contacts: Make sure that the charging contacts on the tracker and charger are clean and dry. You can use a soft, lint-free cloth to wipe them down.
4. Charge the tracker: Place the tracker in the charger and connect it to a power source.
5. Try turning on the tracker: Press and hold the button on the right side of the tracker for a few seconds. If the tracker doesn’t turn on, charge it for at least 10 minutes and try again.
6. Reset the tracker: If the tracker still doesn’t turn on, try resetting it. To do this, press and hold the button on the right side of the tracker for about 10 seconds. The tracker will vibrate and turn off. Then press and hold the button again for about 10 seconds to turn it back on.
The Bottom Line
Fitbit Inspire 2 stuck on water lock – how to unlock it!
The Fitbit Inspire 2 is a great fitness tracker, but it can get stuck on the “water lock” screen after a swim. In this article, we’ll show you how to unlock your Fitbit Inspire 2 and get back to tracking your activity.
First, make sure that your Fitbit is charged and connected to your phone. Next, press and hold one of the buttons on your tracker for 5 seconds. This should bring up the “Settings” menu.
In the “Settings” menu, scroll down to “Water Lock.” Press the select button to select “Water Lock,” and then press the back button to exit. Your Fitbit should now be unlocked.
If these steps don’t work, you can try resetting your device. To do this, press and hold both buttons on your tracker for 10 seconds. Your tracker will restart, and you should be able to unlock it as described above.
