Fixing Tech Issues, One Device at a Time
Guide

How To Fix A Galaxy Watch That’s Stuck On Finishing Up

My name is Alex Wilson, and I am the founder and lead editor of CyberTechnoSys.com. As a lifelong tech enthusiast, I have a deep passion for the ever-evolving world of wearable technology.

What To Know

  • To perform a factory reset, press and hold the Power button and the Home button simultaneously until the watch turns off.
  • Press and hold the power button until the watch turns off, then press and hold the power button again to turn it back on.
  • Press and hold the power button until the watch turns off, then press and hold the power button and the volume down button at the same time until the watch turns on.

Galaxy Watch stuck on finishing up is a frustrating issue, and you are not alone. Many Galaxy Watch users have experienced this, and there are several ways to solve it. In this article, we will outline the solutions for Galaxy Watch stuck on finishing up.

Galaxy Watch Stuck On Finishing Up

Galaxy Watch is a great device, but it’s not without its issues. One of the most common problems users experience is the Galaxy Watch getting stuck on the “Finishing up” screen.

This can be frustrating, especially if you’re in a hurry to use your watch. There are a few things you can try to resolve the issue:

1. Press and hold the Power button until the watch turns off.

2. Press and hold the Power button again until the watch turns on.

3. If the problem persists, try restarting your watch by holding down the Power button and the Home button simultaneously until the watch turns off. Then press and hold the Power button until the watch turns on.

4. If none of the above solutions work, you may need to perform a factory reset. This will erase all your data, so be sure to back up any important information before proceeding. To perform a factory reset, press and hold the Power button and the Home button simultaneously until the watch turns off. Then press and hold the Power button until the watch turns on. When the watch boots up, use the touchscreen to select “Factory data reset.”

It’s important to note that a factory reset will erase all your data, so be sure to back up any important information before proceeding.

What Should I Do If My Galaxy Watch Is Stuck On Finishing Up?

  • 1. Try restarting your watch: Press and hold the power button until the watch turns off, then press and hold the power button again to turn it back on.
  • 2. Check for updates: Make sure your watch is running the latest version of its operating system.
  • 3. Try a hard reset: Press and hold the power button until the watch turns off, then press and hold the power button and the volume down button at the same time until the watch turns on.
  • 4. Contact Samsung support: If your watch is still stuck on “Finishing Up,” you may need to contact Samsung support for further assistance.
  • 5. Consider a factory reset: If your watch is still not working, you may need to perform a factory reset. This will erase all of your data and settings, so be sure to back up your watch first.

How Long Does A Galaxy Watch Take To Finish Up?

How Long Does A Galaxy Watch Take To Finish Up?

If you’re considering buying a Galaxy Watch, you might be wondering how long it will last.

The Galaxy Watch comes in two sizes: 42mm and 46mm. The 42mm model has a battery life of up to 4 days, while the 46mm model can last up to 7 days.

The Galaxy Watch is water resistant up to 50 meters, so you can wear it while swimming or taking a shower. It’s also shock resistant, so it can take a hit and keep on ticking.

The Galaxy Watch has a built-in GPS, so you can track your runs and bike rides without carrying your phone. It also has a heart rate monitor, so you can track your fitness levels.

The Galaxy Watch is compatible with both Android and iOS devices. You can use the Galaxy Wearable app to control your watch, and receive notifications from your phone.

Overall, the Galaxy Watch is a great smartwatch that can last for a long time. It’s water resistant, shock resistant, and has a built-in GPS and heart rate monitor. It’s also compatible with both Android and iOS devices.

Why Might My Galaxy Watch Be Stuck On Finishing Up?

There could be several reasons why your Galaxy Watch might be stuck on “Finishing Up.” Here are some potential causes and solutions:

1. Software Update: Your Galaxy Watch might be stuck on “Finishing Up” because it’s updating its software. This can sometimes happen if the update process encounters a problem. Try restarting your watch by long-pressing the power button and selecting “Restart.” If the update process doesn‘t resume, you can try connecting to Wi-Fi and updating the watch manually through the Galaxy Wearable app.

2. Battery Drain: If your Galaxy Watch’s battery is running low, it might not be able to complete the update process. Try charging your watch for at least an hour and see if the “Finishing Up” message goes away.

3. Connectivity Issues: If your watch isn’t able to connect to your phone or the internet, it might be stuck on “Finishing Up.” Ensure that your phone and watch are connected to the same Wi-Fi network and that Bluetooth is enabled on both devices.

4. Full Storage: If your watch’s storage is full, it might not be able to update properly. Try deleting any unnecessary files or apps to free up space.

How Do I Troubleshoot A Galaxy Watch That Is Stuck On Finishing Up?

If your Galaxy Watch is stuck on “Finishing Up,” there are a few troubleshooting steps you can take to resolve the issue. First, try restarting your watch by pressing and holding the power button until the “Power off” prompt appears, then selecting “Restart.” If that doesn’t work, you can try resetting your watch by holding down both the upper and lower buttons until the “Rebooting” message appears. If neither of these solutions work, you may need to contact Samsung support for further assistance.

Are There Any Risks Involved In Leaving A Galaxy Watch Stuck On Finishing Up?

Leaving a Galaxy Watch stuck on finishing up for an extended period of time can potentially lead to a few risks. Here are some of the potential risks to be aware of:

1. Battery Drainage: When the Galaxy Watch is stuck on finishing up, the screen may remain on, causing the battery to drain faster than normal. If the battery runs out completely, it can damage the battery and affect the performance of the watch.

2. Software Issues: Leaving the watch in an unfinished state for extended periods can cause software issues. The watch may become unresponsive or experience glitches, which can make it difficult or impossible to use.

3. Data Loss: If the watch is not properly shut down, any unsaved data may be lost. This can include notifications, messages, and other important information.

4. Overheating: If the watch is left on for an extended period, it can potentially overheat. Overheating can cause damage to the internal components of the watch, leading to reduced performance or permanent damage.

To avoid these risks, it is recommended to manually shut down the Galaxy Watch if it becomes stuck on finishing up. This can be done by holding down the power button until the watch turns off. If the watch continues to experience issues, it may be necessary to perform a factory reset or seek technical support.

In a nutshell

In conclusion, if your Galaxy Watch is stuck on “finishing up,” there are a few steps you can take to resolve the issue. First, try restarting the device. If that doesn’t work, try resetting it. If neither of those solutions work, you may need to contact Samsung for further assistance.

Was this page helpful?

Alex Wilson

My name is Alex Wilson, and I am the founder and lead editor of CyberTechnoSys.com. As a lifelong tech enthusiast, I have a deep passion for the ever-evolving world of wearable technology.

Popular Posts:

Back to top button