What To Know
- It’s important to note that water damage is not covered under the warranty, so you may need to purchase a new watch if the damage is severe.
- If the screen is still unresponsive, try restarting the watch by holding down the power button until the watch turns off, then pressing and holding the power button again until the watch turns on.
- To do this, hold down the power button until the watch turns off, then hold both buttons (the top button and the bottom button) until the watch turns on and displays the message “Factory Reset.
Swimming with your Samsung Galaxy Watch can be a great experience, but what happens if your watch’s touchscreen stops working afterward? Don’t worry, there are a few things you can do to troubleshoot this issue and get back to using your watch as normal. In this blog post, we’ll explore some common causes of touchscreen problems after swimming, as well as some solutions you can try to get your watch working again. So, whether you’re a seasoned swimmer or just getting started, read on for some helpful tips!
Galaxy Watch Touch Screen Not Working After Swimming
When the Galaxy Watch touch screen stops working after swimming, the issue is typically related to water entering the device. There are a few different things you can try to resolve the issue:
1. Unplug the device: Remove the watch from your wrist and unplug it from the charger. This will prevent any further water damage from occurring.
2. Dry the watch: Use a soft cloth or towel to dry the watch thoroughly. Make sure to get all of the moisture out of the device, including any ports or buttons.
3. Restart the device: Press and hold the Power button until the watch turns off. Then press and hold the Power button again until the watch turns on.
4. Charge the device: Plug the watch into the charger and let it charge for at least 30 minutes. If the watch still doesn’t work, try using a different charger or cable.
5. Reset the device: Press and hold the Power button until the watch turns off. Then press and hold the Power button and the Home button at the same time until the watch turns on.
6. Contact Samsung: If none of the above steps work, contact Samsung for assistance. They may be able to repair or replace the watch.
It’s important to note that water damage is not covered under the warranty, so you may need to purchase a new watch if the damage is severe.
How Do I Fix My Galaxy Watch Touch Screen After Swimming?
- 1. Remove the watch from your wrist and rinse it thoroughly with clean water.
- 2. Use a soft cloth to dry the screen, being careful not to apply too much pressure.
- 3. If the screen is still unresponsive, try restarting the watch by holding down the power button until the watch turns off, then pressing and holding the power button again until the watch turns on.
- 4. If the screen is still unresponsive, try performing a factory reset of the watch. To do this, hold down the power button until the watch turns off, then hold both buttons (the top button and the bottom button) until the watch turns on and displays the message “Factory Reset.”
- 5. If the screen is still unresponsive after trying these steps, you may need to take your watch to a Samsung service center for further assistance.
What Are Some Common Causes Of Touch Screen Issues On Galaxy Watches?
The Samsung Galaxy Watch is a great device, but like all technology, it can experience problems. One common issue users report is with their touch screens. Here are some of the most common causes of touch screen issues on Galaxy Watches, and what you can do to fix them.
1. Moisture Damage: If your Galaxy Watch has been exposed to moisture, such as being worn while swimming or in the shower, it can cause the touch screen to become unresponsive. To fix this, try drying your watch with a soft cloth and allowing it to dry completely before using it.
2. Physical Damage: If your watch has been dropped or exposed to extreme temperatures, it may have caused physical damage to the touch screen. In this case, you may need to take your watch to a repair shop to have it repaired.
3. Software Issues: Sometimes, software issues can cause touch screen problems. To fix this, try restarting your watch or updating its software.
4. Battery Life: If your watch’s battery is low, it can cause the touch screen to become unresponsive. To fix this, try charging your watch for a few hours before using it.
5. App Conflicts: If you have installed a lot of apps on your watch, some of them may be conflicting and causing touch screen issues. To fix this, try uninstalling any apps that you’re not using.
If none of these solutions work, you may need to take your watch to a repair shop to have it repaired.
How Do I Clean My Galaxy Watch Touch Screen?
To clean your Galaxy Watch touch screen, you can use a soft, dry cloth to wipe the screen. If the screen is particularly dirty, you can use a slightly damp cloth to wipe it. Be sure to avoid using too much water, as this could damage the watch. Additionally, you can use a small amount of screen cleaner or eyeglass cleaner on a soft cloth to clean it. Avoid using harsh chemicals or abrasive materials, as these could damage the screen. Finally, always be sure to unplug the watch from its charger before cleaning it.
How Do I Reset My Galaxy Watch Touch Screen?
Resetting your Galaxy Watch touch screen can be a helpful troubleshooting step if it has become unresponsive or is not functioning properly. Here are the steps you can follow to reset your Galaxy Watch touch screen:
1. Power off your Galaxy Watch by pressing and holding the power button until the shutdown menu appears.
2. Press and hold the power button until the “Reboot” option appears on the screen.
3. Press the “Reboot” option.
4. Your Galaxy Watch will restart and display the Samsung logo.
5. Once the Galaxy Watch has restarted, press and hold the power button until the “Power off” option appears on the screen.
6. Press and hold the “Power off” option until the “Restart” option appears.
7. Press the “Restart” option.
8. Your Galaxy Watch will restart and display the Samsung logo.
9. Once the Galaxy Watch has restarted, press and hold the power button until the “Power off” option appears on the screen.
10. Press and hold the “Power off” option until the “Restart” option appears.
11.
What Should I Do If My Galaxy Watch Touch Screen Is Still Not Working After Trying These Troubleshooting Steps?
If your Galaxy Watch touch screen is still not working after trying these troubleshooting steps, there are a few additional steps you can take to try and resolve the issue.
First, try restarting your watch by pressing and holding the power button until the watch turns off, then pressing and holding the power button again until the watch turns on.
If that doesn’t work, you can try performing a factory reset on your watch. To do this, press and hold the power button until the watch turns off, then press and hold the Home button until the watch turns on. When the watch starts up, hold the Home button until the factory reset screen appears.
Finally, if neither of the above steps work, you may need to contact Samsung for further assistance. They may be able to repair or replace your watch if it is still under warranty.
Recommendations
If you’re still experiencing issues with your Galaxy Watch touch screen not working after swimming, consider taking your device to a Samsung technician or trying a different method of cleaning the screen. Whatever you do, don’t give up hope! With a little persistence and patience, you’ll have your Galaxy Watch back up and running in no time.
