Why Won’t My Garmin Edge 130 Turn On? Here’s The Fix!

Garmin Edge 130 is a bike computer that is very popular among cyclists. It is known for its simplicity and ease of use. However, some users have reported that their Garmin Edge 130 won’t turn on. If you are experiencing this problem, don’t worry, there are several solutions you can try to fix your Garmin Edge 130.

Garmin Edge 130 Wont Turn On

The Garmin Edge 130 won’t turn on!

I’ve been pretty happy with my Garmin Edge 130, but it’s starting to act up.

When I turned it on today, it turned on, then immediately shut down.

I tried restarting it, but the same thing happened.

Then I tried removing the battery and putting it back in, but the same thing happened.

Now it’s completely dead.

I’ve had this problem with other devices before, and it usually means that the battery is dying.

But I’m not sure what’s going on with the Garmin Edge 130.

Does anyone know how to fix this?

What To Do If Your Garmin Edge 130 Won’t Turn On?

• 1. Make sure the battery is charged.
• 2. Try a different USB port or charger.
• 3. Try a different USB cable.
• 4. Try a hard reset.
• 5. If none of the above work, contact Garmin customer support for assistance.

How To Charge A Garmin Edge 130?

Garmin Edge 130 is a compact and easy-to-use bike computer. It has a rechargeable battery that lasts for about 15 hours on a single charge. Here’s how to charge your Garmin Edge 130:

1. Connect the charging cable to the device: The charging cable has a micro-USB connector on one end and a USB connector on the other end. Connect the micro-USB connector to the charging port on your Garmin Edge 130.

2. Connect the charging cable to a power source: Connect the USB connector to a USB port on your computer or a USB power adapter.

3. Charge the device: The charging indicator on the device will light up when the device is connected to a power source. The device will start charging.

4. Monitor the charge: The charging indicator will turn green when the device is fully charged.

Charging your Garmin Edge 130 is easy and can be done at home or on the go. The device comes with a charging cable, and you can use any USB power source to charge it.

Note: Charging your Garmin Edge 130 from a USB port on your computer may take longer than charging from a power adapter. It is recommended to use a power adapter to charge the device.

How Long Does A Garmin Edge 130 Battery Last?

A Garmin Edge 130 battery typically lasts between 10 and 15 hours, depending on usage. This includes both cycling and non-cycling activities, such as GPS tracking and data recording. The battery will last for a shorter period of time if the device is used heavily for GPS tracking or data recording, and for a longer time if the device is used primarily for cycling.

There are a few things you can do to help extend the life of your Garmin Edge 130 battery:

1. Turn off GPS tracking and data recording when you are not using them.

2. Use the device in battery save mode.

3. Store the device in a cool, dry place.

4. Recharge the battery as soon as possible after using it.

Keep in mind that the battery life of a Garmin Edge 130 will also depend on the age of the device, the ambient temperature, and the battery’s condition.

How To Fix A Garmin Edge 130 That Won’t Hold A Charge?

If your Garmin Edge 130 won’t hold a charge, there are a few troubleshooting steps you can take to try to resolve the issue. First, make sure you’re using the device’s original charger and USB cable. If the charger or cable is damaged or not compatible with the device, it may not be able to charge properly.

Next, check for any debris or moisture in the charging port. Sometimes, dust or lint can interfere with the charging process, so gently clean the port with a soft, dry cloth. If the port is wet, allow it to completely dry before attempting to charge the device.

Another potential solution is to update the device’s software. Garmin regularly releases firmware updates to address known issues and improve device performance. To check for and install updates, connect your Garmin Edge 130 to your computer using a USB cable and open the Garmin Express application. Follow the prompts to check for and install any available updates.

If none of the above solutions work, it’s possible that the device’s battery may need to be replaced. Garmin offers replacement batteries for many of their devices, including the Garmin Edge 130. To replace the battery, you’ll need to carefully disassemble the device, following the instructions provided by Garmin.

Remember, always refer to the device’s user manual for detailed instructions on troubleshooting and repairing your Garmin Edge 130.

How To Reset A Garmin Edge 130?

To reset a Garmin Edge 130, you can follow these steps:

1. Press and hold the “Power” button until the device turns off.

2. Once the device is turned off, press and hold the “Lap/Reset” button and the “Power” button at the same time.

3. Continue to hold both buttons until the device turns on and begins searching for satellites.

4. Once the device has found satellites, it will display the Garmin logo and the reset process is complete.

It is important to note, that a reset will erase all user data and settings from the device, so it is important to back up your data before performing a reset.

Final Thoughts

In conclusion, if your Garmin Edge 130 won’t turn on, there could be a variety of reasons. You may be able to fix the issue by charging the device, checking for software updates, or performing a restart. However, if none of these solutions work, it’s likely best to contact Garmin customer service for further assistance.