Is Your Garmin Fenix 6 Not Working? Here’s The Solution!

Garmin Fenix 6 is one of the best smartwatches out there in the market. Its popularity can be judged by the fact that it has millions of users. However, some users have faced issues with Garmin Fenix 6 gesture not working. If you are also facing the same issue, don’t worry. In this blog post, we will discuss some solutions to fix Garmin Fenix 6 gesture not working issue.

Garmin Fenix 6 Gesture Not Working

By Garmin GPS

The Garmin Fenix 6 is the most advanced smartwatch Garmin has ever made. It offers a number of features that have never been seen before in a Garmin watch, including a new touchscreen interface, built-in music storage, and contactless payments.

However, some users have been reporting that the gesture feature on the Garmin Fenix 6 is not working. The gesture feature allows users to control their watch by waving their hand in front of the screen.

If you are experiencing issues with the gesture feature on your Garmin Fenix 6, there are a few things you can do to troubleshoot the problem.

First, try restarting your watch. To do this, press and hold the Power button until the watch turns off. Then press and hold the Power button again until the watch turns on.

If that doesn’t work, you can try resetting your watch. To do this, press and hold the Power button until the watch turns off. Then press and hold the Up button and the Down button at the same time until the watch turns on.

If neither of those solutions work, you may need to contact Garmin support for further assistance.

What To Do If The Garmin Fenix 6 Gesture Is Not Working?

• 1. Check the battery level of the Garmin Fenix 6. Low battery may cause the gesture feature to stop working.
• 2. Restart the Garmin Fenix 6. Sometimes, a simple restart can fix the issue.
• 3. Check the settings of the Garmin Fenix 6. Make sure the gesture feature is enabled.
• 4. Clean the sensors of the Garmin Fenix 6. Dust or debris on the sensors may prevent the gesture feature from working.
• 5. Contact Garmin customer support. If the gesture feature still does not work, you may need to send the device in for repair.

How To Troubleshoot Gesture Issues On The Garmin Fenix 6?

The Garmin Fenix 6 is one of the best multisport GPS watches. However, sometimes, the gesture issues may arise. Today, we will share with you a few troubleshooting tips to fix these gesture issues.

1. Check Firmware Update

Before you start troubleshooting, ensure that you have the latest firmware version installed on your Garmin Fenix 6. You can check for updates through the Garmin Connect app or Garmin Express.

2. Check Screen Brightness

If the screen is too bright or too dim, it may cause gesture issues. Adjust the screen brightness accordingly.

3. Restart the Watch

Sometimes, a simple restart can fix the issue. Press and hold the Power button until the watch turns off. Then press and hold the Power button again to turn it back on.

4. Calibrate the Accelerometer

If the gesture issues persist, you can try calibrating the accelerometer. To do this, go to Settings > System > Calibrate Accelerometer. Follow the instructions on the screen to calibrate the accelerometer.

5. Reset the Watch

If none of the above solutions work, you can try resetting the watch. This will erase all your data, so ensure that you have a backup. To reset the watch, go to Settings > System > Reset. Follow the on-screen instructions to reset the watch.

6. Contact Garmin Support

If none of the above solutions work, you can contact Garmin support. They will be able to help you troubleshoot the issue and provide further assistance.

By following these tips, you should be able to fix gesture issues on your Garmin Fenix 6.

How To Reset The Gesture Settings On The Garmin Fenix 6?

The Garmin Fenix 6 is an advanced GPS watch that offers a wide range of features, including the ability to customize the watch’s gesture settings. However, if you accidentally change these settings and don’t know how to reset them, don’t worry! In this article, we’ll show you how to easily reset the gesture settings on your Garmin Fenix 6.

To reset the gesture settings on your Garmin Fenix 6, follow these steps:

1. First, make sure that your Garmin Fenix 6 is powered on and connected to your smartphone.

2. Next, open the Garmin Connect app on your smartphone.

3. Tap the menu icon in the top left corner of the screen.

4. Scroll down and tap on “Settings”.

5. Tap on “Device Settings”.

6. Tap on “Fenix 6”.

7. Tap on “Gestures”.

8. Tap on “Reset Gestures”.

9. Tap on “Yes” to confirm your decision.

That’s it! By following these steps, you should be able to reset the gesture settings on your Garmin Fenix 6.

What Are The Common Gesture Issues On The Garmin Fenix 6?

Garmin Fenix 6 is a reliable smartwatch, but users might experience some gesture issues. These issues usually arise due to hardware problems or software glitches. Here are some of the most common gesture issues on the Garmin Fenix 6:

1. Touchscreen Issues: Some users have reported unresponsive touchscreens on their Garmin Fenix 6. This issue could be due to a software glitch or damage to the touchscreen. To resolve this, you can try restarting the watch or performing a factory reset. If the problem persists, you may need to contact Garmin customer support for further assistance.

2. Touchscreen Calibration: The touchscreen on the Garmin Fenix 6 needs to be calibrated regularly to ensure accurate touch recognition. If you fail to calibrate the touchscreen, you may experience issues when tapping or swiping on the screen. To calibrate the touchscreen, go to the settings menu and select “Touchscreen Calibration.” Follow the on-screen instructions to calibrate the touchscreen.

3. Touchscreen Sensitivity: Some users may find that the touchscreen on their Garmin Fenix 6 is too sensitive. This can lead to accidental taps and swipes, which can be annoying. To adjust the touchscreen sensitivity, go to the settings menu and select “Touchscreen Sensitivity.

What Are The Alternative Methods Of Interacting With The Garmin Fenix 6 If The Gesture Is Not Working?

If the gesture feature on your Garmin Fenix 6 is not working properly, there are a few alternative methods that you can use to interact with the device. Here are some options:

1. Use the touchscreen: The Garmin Fenix 6 has a touchscreen display that allows you to navigate through the device’s menus and options. You can tap, swipe, and scroll to access various settings and features.

2. Use the buttons: The Garmin Fenix 6 has physical buttons on the side that you can use to navigate through the device’s menus and options. The buttons include Start/Stop, Back, and Select.

3. Use the bezel: The Garmin Fenix 6 has a rotating bezel that you can use to navigate through the device’s menus and options. The bezel is located on the right side of the device and can be used to scroll through options and select items.

4. Use the Garmin Connect app: If you have a smartphone, you can use the Garmin Connect app to remotely control your Garmin Fenix 6. You can use the app to receive notifications, view your activity data, and control various settings on the device.

Overall, there are several alternative methods that you can use to interact with your Garmin Fenix 6 if the gesture feature is not working properly.

Final Note

If you’re experiencing any issues with your Garmin Fenix 6 gestures, don’t worry – you’re not alone. Many users have reported problems with gesture control on this watch.

One common problem is the gesture failing to work at all. This can be frustrating, especially if you’re trying to use gesture controls to change settings or access features quickly.

Another issue reported is that the gesture sometimes works, but inconsistently. You might be able to use it one time, but not the next.

If you’ve tried troubleshooting and are still having problems with your Garmin Fenix 6 gestures, it might be time to consider a repair. We can get your watch working like new again.

Contact us today for a free quote.