How To Fix: Garmin Vivomove Heart Rate Display Not Working

Garmin Vivomove is a smartwatch that is known for its accurate heart rate monitoring. However, some users have reported that the heart rate display is not working on their watch. If you are experiencing this issue, there are several steps you can take to troubleshoot the problem.

First, check the battery level of the watch. If the battery is low, the heart rate sensor may not work properly. Recharge the watch and see if the heart rate display comes back.

Next, check the connection between the watch and the heart rate sensor. Make sure that the sensor is securely attached to the watch and that it is not damaged.

Finally, try restarting the watch. Sometimes, a simple restart can fix the problem.

Garmin Vivomove Heart Rate Display Not Working

If your Garmin Vivomove HR display is not lighting up or it is not showing any characters on the screen, this is usually caused by either a faulty battery or faulty flex cable. In this article, we will discuss how to identify the problem and how to fix it.

How to Identify the Problem

To determine whether the problem is with the flex cable or the battery, you can try the following steps:

1. Remove the watch from your wrist.

2. Press and hold the “Start/Stop” button for 10 seconds.

3. Check if the display lights up. If it does, then the problem is with the flex cable. If the display does not light up, then the problem is with the battery.

How to Fix the Problem

If the problem is with the flex cable, you will need to replace the flex cable. You can do this by purchasing a replacement flex cable from Garmin. If the problem is with the battery, you will need to replace the battery. You can do this by purchasing a replacement battery from Garmin.

How to Replace the Flex Cable

To replace the flex cable, you will need to follow these steps:

2. Use a Phillips head screwdriver to remove the screws on the back of the watch.

3. Carefully remove the back cover of the watch.

4. Disconnect the flex cable from the motherboard.

5. Connect the new flex cable to the motherboard.

6. Replace the back cover of the watch.

7. Reinstall the screws on the back of the watch.

How to Replace the Battery

To replace the battery, you will need to follow these steps:

4. Remove the old battery and replace it with a new one.

5. Replace the back cover of the watch.

6. Reinstall the screws on the back of the watch.

What Are The Common Reasons Why The Heart Rate Display On A Garmin Vivomove May Not Work?

• 1. Low battery: Ensure the Garmin Vivomove has sufficient battery life to display the heart rate.
• 2. Inaccurate data: The heart rate data may not be accurate if the Garmin Vivomove is not worn correctly or is positioned incorrectly.
• 3. Connectivity issues: The heart rate data may not be displayed if the Garmin Vivomove is not connected to a mobile device or the internet.
• 4. Software glitches: The heart rate data may not be displayed if there are any software glitches or bugs in the Garmin Vivomove.
• 5. Hardware issues: The heart rate data may not be displayed if there are any hardware issues with the Garmin Vivomove, such as a faulty sensor or display.

How Do I Troubleshoot My Garmin Vivomove If The Heart Rate Display Is Not Working Properly?

The Garmin Vivomove is a smartwatch that tracks your heart rate and activity levels. However, sometimes the heart rate display may not work properly. Here are some troubleshooting steps to try:

1. Restart your watch: Press and hold the Power button until the watch turns off. Then press and hold the Power button again until the watch turns on.

2. Check the heart rate sensor: The heart rate sensor is located on the back of the watch. Make sure that it is clean and free from debris.

3. Check your watch’s settings: Make sure that the heart rate setting is turned on and that the watch is set to the correct heart rate zone.

4. Check the Garmin Connect app: Open the Garmin Connect app on your mobile device and check to see if the heart rate data is being recorded. If the data is not being recorded, you may need to restart the Garmin Connect app.

5. Contact Garmin support: If none of the above steps work, you may need to contact Garmin support for further assistance. They may be able to help you troubleshoot the problem.

Are There Any Specific Settings That I Should Adjust On My Garmin Vivomove To Improve The Heart Rate Tracking Accuracy?

To improve the heart rate tracking accuracy on your Garmin Vivomove, there are a few specific settings you can adjust:

1. Wrist Placement: Make sure the device is worn snugly on your wrist, right below your wrist bone. Avoid wearing it too tightly or loosely, as this can affect the heart rate reading.

2. Heart Rate Zones: Set your heart rate zones based on your personal fitness level and goals. These zones can help you understand the intensity of your workouts and can help you gauge the effectiveness of your exercise routine.

3. Automatic Heart Rate Recording: Enable automatic heart rate recording during exercise to get a continuous and accurate reading of your heart rate.

4. Calibrate the Heart Rate Monitor: Calibrate the heart rate monitor by wearing it while at rest and ensuring that it remains still. This will help the device establish a baseline for your heart rate at rest, which will improve the accuracy of your heart rate readings during exercise.

5. Update the Firmware: Regularly update your Garmin Vivomove’s firmware to ensure that it is running the latest software version, which may contain improvements and bug fixes for heart rate tracking accuracy.

By following these tips, you can improve the heart rate tracking accuracy on your Garmin Vivomove and get the most out of your exercise routine.

Are There Any Other Factors That Can Affect The Heart Rate Tracking Accuracy On My Garmin Vivomove, Such As My Fitness Level Or Physical Activity?

The heart rate tracking accuracy on your Garmin Vivomove can be affected by various factors such as fitness level and physical activity. Here are some key points to consider:

1. Fitness Level: Your fitness level can impact the accuracy of heart rate tracking. As you become more physically fit, your heart becomes more efficient at pumping blood, which can lead to a lower heart rate during exercise. Therefore, it’s important to consider your fitness level when interpreting your heart rate data.

2. Physical activity: The type of physical activity you engage in can also affect heart rate tracking accuracy. Vigorous activities like running or cycling can cause your heart rate to increase significantly, while activities like walking or yoga may cause a smaller increase. It’s important to be aware of the type of activity you’re doing when interpreting your heart rate data.

3. Environmental Factors: Environmental factors such as temperature, altitude, and humidity can also affect heart rate tracking accuracy. For example, exercising in hot and humid conditions can cause your heart rate to increase more than it would in cooler conditions.

4. Heart Rate Variability (HRV): HRV is a measure of the variation in time between consecutive heartbeats. A higher HRV is generally associated with better cardiovascular fitness, while a lower HRV may indicate stress or fatigue. HRV can be affected by a variety of factors, including fitness level, stress, and sleep quality.

How Can I Ensure That My Garmin Vivomove Is Recording Accurate Heart Rate Data During Exercise Or Training Sessions?

One way to ensure that your Garmin Vivomove is recording accurate heart rate data during exercise or training sessions is to wear the device snugly and securely on your wrist. The heart rate sensor should be positioned close to your skin, such as on the inside of your wrist or forearm. Another way to ensure accurate heart rate data is to pair the device with a heart rate monitor chest strap. This will provide a more accurate reading of your heart beat.

Final Thoughts

If you’re experiencing issues with the heart rate display on your Garmin Vivomove, there are a few troubleshooting steps you can take to try and resolve the problem. First, check to make sure that both the optical heart rate sensor and the wrist unit are snugly fitted against your skin. The heart rate sensor should be positioned close to your wrist bone. If the issue persists, try resetting the device. To do this, press and hold the down button until the device turns off. Then press and hold the up button until the device turns on. This should return the device to its default settings. If the problem still persists, we recommend contacting Garmin customer support for further assistance.