What To Know
- Applying a dBrand skin is a great way to personalize your device and protect it from scratches and wear.
- Follow the same process for the bottom of your MacBook Pro, the palm rests, and any other areas you want to cover with the skin.
- You can use a hairdryer on a low heat setting to gently warm the skin and loosen the adhesive.
Want to give your MacBook Pro a fresh new look without breaking the bank? Applying a dBrand skin is a great way to personalize your device and protect it from scratches and wear. But with so many intricate curves and edges, applying a skin can seem daunting. Fear not! This comprehensive guide will walk you through the process step-by-step, ensuring a smooth and successful application.
Preparing for the Skin Application
Before you dive into the application process, it’s crucial to prepare both your MacBook Pro and the dBrand skin. This ensures a clean and seamless application.
1. Gather Your Supplies
First, gather everything you need for the application:
- Your dBrand skin: Make sure you have the correct skin for your MacBook Pro model.
- A microfiber cloth: This will be used to clean your device and smooth out any air bubbles.
- A squeegee: A credit card or gift card will also work in a pinch.
- A hairdryer: This is optional but helpful for removing stubborn air bubbles.
- A well-lit work area: This will help you see what you’re doing.
2. Clean Your MacBook Pro
Thoroughly clean your MacBook Pro’s surface with the microfiber cloth to remove any dust, fingerprints, or debris. Pay special attention to the areas where the skin will be applied, such as the lid, bottom, and palm rests.
3. Prepare the Skin
Remove the dBrand skin from its packaging and carefully peel off the backing paper. Avoid touching the adhesive side of the skin, as this can leave fingerprints.
Applying the Skin to Your MacBook Pro
Now, it’s time to apply the dBrand skin to your MacBook Pro. Follow these steps for a flawless application:
1. Start with the Lid
Align the skin with the top edge of your MacBook Pro’s lid, ensuring it’s centered. Carefully place the skin onto the lid, starting from the top and slowly working your way down.
2. Smooth out the Skin
Use the squeegee to smooth out the skin from the center outwards, pressing firmly but gently. This will help to remove any air bubbles and ensure a smooth finish.
3. Remove Air Bubbles
If any air bubbles remain, use the hairdryer on a low heat setting to gently warm the skin. This will help to loosen the adhesive and allow you to smooth out the bubbles.
4. Repeat for Other Areas
Follow the same process for the bottom of your MacBook Pro, the palm rests, and any other areas you want to cover with the skin.
Finishing Touches
Once all the skin sections are applied, you’re almost done! Here are a few final steps to ensure a perfect finish:
1. Trim Excess Skin
Carefully trim any excess skin around the edges of your MacBook Pro using a sharp pair of scissors.
2. Apply Pressure
Once the skin is trimmed, apply firm pressure to the entire surface for a few minutes. This will help to ensure the skin adheres properly.
3. Allow Time to Set
Leave your MacBook Pro undisturbed for at least 24 hours to allow the adhesive to fully set. Avoid using your device during this time to prevent the skin from lifting or peeling.
Final Thoughts: Time to Show Off Your New Look!
Congratulations! You have successfully applied a dBrand skin to your MacBook Pro. Now you can enjoy your personalized and protected device. Remember, with a little patience and careful attention, you can achieve a professional-looking finish.
Basics You Wanted To Know
Q: Can I remove the dBrand skin later?
A: Yes, dBrand skins are designed to be removable without leaving any residue. However, it’s best to apply the skin with care to prevent any damage to the adhesive.
Q: What happens if I get a bubble under the skin?
A: Don’t worry! You can use a hairdryer on a low heat setting to gently warm the skin and loosen the adhesive. This will allow you to smooth out the bubble.
Q: Can I apply a dBrand skin over an existing case?
A: It’s not recommended to apply a dBrand skin over an existing case, as this can affect the adhesion and create an uneven finish.
Q: How long will the dBrand skin last?
A: dBrand skins are designed to be durable and long-lasting. With proper care, they can last for several years.
Q: What if I make a mistake during application?
A: Don’t worry! dBrand skins are repositionable, so you can lift and re-apply them if you make a mistake. Just be careful not to touch the adhesive side.
