How To Cancel A Brother Print Job: A Step-by-step Guide

Canceling a print job on your Brother printer is a quick and easy process. If you’re in a hurry, you can simply unplug the printer and wait for the print job to be cleared. However, you can also cancel the print job using the control panel or software that came with your printer. Here’s how to do it.

How To Cancel Brother Print Job

Cancelling a print job on a Brother printer is a simple process that can be done in a few easy steps. However, before you start, make sure you have the following information ready:

* Brother printer model

* Name of the print job you want to cancel

With this information, you can follow these steps to cancel a print job on your Brother printer:

1. Press the “Menu” button on your printer’s control panel.

2. Use the arrow keys to navigate to the “Cancel” or “Stop” option.

3. Press the “Enter” button to select this option.

4. Use the arrow keys to select the print job you want to cancel.

5. Press the “Enter” button to cancel the print job.

If your printer does not have a “Cancel” or “Stop” option, you can try the following steps:

2. Use the arrow keys to navigate to the “Setup” or “Options” menu.

4. Use the arrow keys to navigate to the “Cancel” or “Stop” option.

If the above steps do not work, you can try the following options:

* Turn off the printer and unplug it from the power source.

* Wait a few minutes before turning the printer back on.

* Press the “Menu” button on your printer’s control panel.

* Use the arrow keys to navigate to the “Cancel” or “Stop” option.

* Press the “Enter” button to cancel the print job.

It is important to always double-check that the printer is turned off and unplugged from the power source before performing any maintenance or troubleshooting steps.

How Do I Cancel A Print Job On My Brother Printer?

• 1. Go to the printer’s control panel and press the “Cancel” button.
• 2. If there isn’t a “Cancel” button, press the “Resume/Cancel” button.
• 3. If neither of those buttons work, try turning off the printer and unplugging it for a few seconds.
• 4. After restarting the printer, try canceling the print job again.
• 5. If none of the above steps work, you may need to contact Brother support for further assistance.

How Do I Cancel A Print Job On My Brother Printer If It’s Stuck?

A Brother printer is a high-quality, reliable printer that is perfect for both home and office use. However, sometimes print jobs can get stuck and need to be cancelled. This can be a frustrating problem, but there are a few steps you can take to try to resolve the issue.

First, try pressing the “Cancel” button on your printer. This should stop the print job and allow you to start a new one. If that doesn’t work, you can try restarting your printer. To do this, simply turn it off and then back on again.

If neither of these steps work, you may need to contact Brother customer support. They can help you troubleshoot the problem and find a solution.

Overall, cancelling a print job on a Brother printer can be a simple process. However, if the problem persists, it’s important to reach out to customer support for assistance.

How Do I Cancel A Print Job On My Brother Printer If It’s Printing Slowly?

To cancel a print job on a Brother printer if it’s printing slowly, you can follow these steps:

1. Press the “Cancel” button on your printer’s control panel. This button is usually located in the top right corner of the control panel.

2. Wait for the printer to cancel the print job. This may take a few seconds.

3. Check the printer’s status lights to see if the job has been canceled. If the job has been canceled, the status lights will stop flashing and remain steady.

4. If the job has not been canceled, you can try restarting the printer. To do this, unplug the printer’s power cord from the power outlet, wait a few seconds, and then plug it back in.

5. If the job still has not been canceled, you can try using the printer’s web interface to cancel the job. To do this, open a web browser on your computer, enter the printer’s IP address in the address bar, and log in to the printer’s web interface. Once you are logged in, you should be able to find an option to cancel the print job.

Please note that these instructions are general and may vary depending on the specific model of your Brother printer. For detailed instructions, please consult the user manual or consult the Brother support website.

How Do I Cancel A Print Job On My Brother Printer If It’s Printing The Wrong Document?

To cancel a print job on your Brother printer if it’s printing the wrong document, follow these steps:

1. Press the “Cancel” button on your printer’s control panel. This button is usually marked with a triangle with an exclamation mark inside.

2. If the printer continues to print, unplug the power cord from the back of the printer.

3. Wait for the printer to stop printing and then plug the power cord back in.

4. Press the “Cancel” button again to cancel the print job.

5. If the printer still continues to print, you can try restarting it by pressing and holding the “Power” button for 10 seconds.

6. Once the printer has restarted, press the “Cancel” button again to cancel the print job.

If these steps don‘t work, you may need to contact Brother support for further assistance.

How Do I Cancel A Print Job On My Brother Printer If It’s Printing Blank Pages?

To cancel a print job on your Brother printer if it’s printing blank pages, follow these steps:

1. Locate the printer’s control panel: The control panel is typically located on the front of the printer, but it may be located elsewhere depending on the model.

2. Press the “Cancel” button: The “Cancel” button is typically located on the front of the printer, but it may be located elsewhere depending on the model.

3. Wait for the printer to stop printing: After pressing the “Cancel” button, the printer will stop printing the current job. It may take some time for the printer to stop printing, so be patient.

4. Check the printer’s status: Once the printer has stopped printing, check the printer’s status to ensure that it has stopped printing. If the printer is still printing, repeat steps 2 and 3.

5. Clear any paper jams: If the printer is still printing blank pages, there may be paper jammed in the printer. Check the paper tray and remove any paper that is jammed.

6. Try printing again: Once the printer has stopped printing, try printing again. If the printer is still printing blank pages, there may be a problem with the printer’s hardware or software.

Summary

In conclusion, cancelling a Brother print job is a quick and easy process. By following these simple steps, you can ensure that your print job is cancelled and that no further printing will occur. Remember, it is important to cancel print jobs in order to save paper and ink, as well as to protect your privacy.