How To Restart Your Kyocera Printer Remotely: A Step-by-step Guide

The Kyocera printer is a high-quality device that is known for its reliability. However, like all printers, it can sometimes experience problems. One common issue that Kyocera printers have is when they stop printing. This can be frustrating, especially if you are in the middle of a print job. Fortunately, there is a simple fix for this problem: restarting the printer. In this blog post, we will show you how to restart your Kyocera printer remotely, so you can keep your print jobs running smoothly.

How To Restart Kyocera Printer Remotely

Restarting a Kyocera printer remotely can be achieved through the printer’s web interface. Here’s how to do it:

1. First, ensure that the printer is connected to your network and that you can access its web interface.

2. Open a web browser and type the printer’s IP address into the address bar.

3. Enter your printer’s username and password, and then select the “Log In” button.

4. Once logged in, locate the “Restart” or “Power” option in the printer’s web interface.

5. Click on the “Restart” or “Power” button to initiate the printer’s restart process.

6. Wait for the printer to restart, which may take several minutes.

7. Once the printer has restarted, you can access its web interface again by using the printer’s IP address and logging in with your printer’s username and password.

It’s important to note that restarting a Kyocera printer remotely may cause any print jobs in progress to be lost. If you’re experiencing issues with your printer, it’s recommended to first troubleshoot the problem before resorting to a restart.

How Do I Remotely Access The Kyocera Printer?

• 1. Connect to your printer’s network: Make sure your printer is connected to the same network as your computer.
• 2. Install the Kyocera printer driver: Download the Kyocera printer driver from the Kyocera website and install on your computer.
• 3. Open the printer properties: In Windows, right-click the printer icon and select “Printer properties.” In Mac, open System Preferences and select “Printers.”
• 4. Select the “Sharing” tab: In the printer properties, select the “Sharing” tab.
• 5. Enable printer sharing: Check the box next to “Share this printer.” Enter a name for the printer and choose the security settings. Click “OK” to save your changes.
• Now you should be able to remotely access your Kyocera printer from any device connected to your network.

How Do I Power Cycle My Kyocera Printer?

Power cycling a printer is a process that removes any temporary software or hardware issues. To power cycle a Kyocera printer, follow these steps:

1. Disconnect the power cord from the printer.

2. Wait for about 30 seconds.

3. Plug the power cord back into the printer.

4. Wait for the printer to turn on.

5. If the printer still does not turn on, press the Power button to turn it on.

If the printer still does not turn on, there may be a more serious problem. In this case, you should contact Kyocera technical support for assistance.

How Do I Reset My Kyocera Printer?

To reset your Kyocera printer, follow these steps:

1. Unplug the printer from the power source.

2. Press and hold the “Cancel” button.

3. While holding the “Cancel” button, plug the printer back into the power source.

4. Continue holding the “Cancel” button for about 5 seconds.

5. Release the “Cancel” button.

6. The printer should now be reset.

If the above steps do not resolve the issue, you may need to contact Kyocera’s customer service for assistance.

How Do I Troubleshoot My Kyocera Printer?

Kyocera printer troubleshooting can be broken down into several categories. Here are some common issues, and steps you can take to address them:

1. Paper Jams: This is usually caused by paper that is either too wide or too curled for the printer’s feed mechanism. Remove any paper that is jammed in the printer, and try loading fresh paper that is compatible with your printer.

2. Ink Cartridge Problems: If your printer is not recognizing new ink cartridges, you may need to align the cartridges. To do this, you will need to remove the cartridges, and then reinstall them.

3. Connectivity Issues: If your printer is not connecting to your computer, you may need to check the USB cable, or the wireless settings on your computer.

4. Print Quality Issues: If your printer is not printing clearly, you may need to adjust the print quality settings. To do this, you will need to go into the printer’s settings, and select the appropriate print quality setting.

5. Other Issues: If your printer is not printing at all, you may need to check the power supply, or the ink cartridges. You may also need to contact Kyocera customer service for more help.

How Do I Update My Kyocera Printer’s Firmware?

Updating the firmware on your Kyocera printer is a simple and straightforward process. First, you’ll need to visit Kyocera‘s website and download the latest firmware update for your specific printer model. Once you have downloaded the update, you will need to connect your printer to your computer using a USB cable.

Once the printer is connected, open the printer’s properties window on your computer. This can usually be done by right-clicking on the icon for your printer in the Devices and Printers section of your computer’s control panel. In the properties window, you should see a section labeled “Update Driver.” Click on this option, and then follow the on-screen instructions to install the firmware update.

Once the update is complete, your printer should restart automatically. You can then disconnect the USB cable and proceed with using your printer as usual. If you encounter any issues during the update process, you can contact Kyocera’s customer support for assistance.

Takeaways

In conclusion, restarting your Kyocera printer remotely is a simple process that can help you troubleshoot common issues and keep your printer running smoothly. By following these easy steps, you can easily restart your printer from anywhere in the world.