Guide

Solved: Hp Monitor Hdmi Inactive Input Signal Not Found Error

My name is Alex Wilson, and I am the founder and lead editor of CyberTechnoSys.com. As a lifelong tech enthusiast, I have a deep passion for the ever-evolving world of wearable technology.

What To Know

  • Make sure that the HDMI cable you are using is in good condition and securely connected to the monitor and the device you are trying to connect it to.
  • Try using a different HDMI port on your device or the monitor to rule out any issues with a specific port.
  • If your monitor is displaying “HDMI INACTIVE SIGNAL NOT FOUND” and you are unable to find a solution, it may be best to contact the manufacturer for further help.

If you’re an HP monitor owner, you may have come across an error message that reads “HDMI Inactive Input Signal Not Found” at some point. This error can be frustrating, especially if you’re in the middle of an important task or game. In this blog post, we’ll take a look at why your HP monitor is displaying this error and what you can do to fix it.

Hp Monitor Hdmi Inactive Input Signal Not Found

If your HP monitor displays the message “HDMI INACTIVE SIGNAL NOT FOUND,” it means that the monitor is not receiving an HDMI input signal. This could be due to several reasons:

1. HDMI Cable: Make sure that the HDMI cable you are using is in good condition and securely connected to the monitor and the device you are trying to connect it to.

2. Device Compatibility: Not all devices are compatible with HDMI, so make sure that your device is capable of outputting an HDMI signal.

3. Source Input: Ensure that the device is set to output an HDMI signal. On most devices, this can be changed in the settings menu.

4. HDMI Switch: If you are using an HDMI switch, make sure that it is properly configured and that the correct input is selected.

5. HDMI Port: Try using a different HDMI port on your device or the monitor to rule out any issues with a specific port.

6. Device Power: Ensure that both the device and the monitor are powered on and functioning properly.

7. HDMI Cable Length: The HDMI cable should be no longer than 5 meters (16 feet) to avoid signal degradation.

8. HDMI Cable Quality: Use a good quality HDMI cable that meets the HDMI 2.0 specifications.

9. Display Settings: Check the display settings on your device to ensure that they are set to the correct input.

10. Troubleshooting: If none of the above solutions work, try troubleshooting the device or contact the manufacturer for assistance.

Note: If your monitor is displaying “HDMI INACTIVE SIGNAL NOT FOUND” and you are unable to find a solution, it may be best to contact the manufacturer for further help.

How Do I Troubleshoot An Inactive Hdmi Input Signal On My Hp Monitor?

  • 1. Check the HDMI cable connection between your monitor and the device it’s connected to. Make sure the cable is securely plugged in at both ends and that it’s not a damaged cable.
  • 2. Try using a different HDMI cable to see if the issue persists. Sometimes, a damaged or faulty HDMI cable can cause an inactive HDMI input signal.
  • 3. Restart the device you’re connecting to the monitor. Sometimes, a software or firmware update can cause a temporary glitch that can be fixed by restarting the device.
  • 4. Check the device’s output settings. Make sure the device is set to output audio and video through the HDMI port you’re using.
  • 5. Try connecting the monitor to a different device to see if the HDMI input signal becomes active. This will help you determine if the issue is with the monitor or the device it’s connected to.

How Do I Adjust The Input Source On My Hp Monitor?

HP monitors come with a variety of input sources, such as HDMI, DisplayPort, and VGA. To change the input source on your HP monitor, follow these steps:

1. Press the “Menu” button on your monitor’s control panel.

2. Use the arrow keys to navigate to the “Input” or “Source” menu.

3. Use the arrow keys to select the desired input source.

4. Press the “Enter” or “OK” button to confirm the selection.

Note: The exact steps may vary depending on the model of HP monitor you have. If you have trouble finding the input source menu, consult the user manual for your specific monitor model.

How Do I Reset My Hp Monitor To Factory Settings?

To reset your HP monitor to factory settings, you can follow these steps:

1. Disconnect the monitor from the power source.

2. Press and hold the power button on the front of the monitor for 10 seconds.

3. Reconnect the monitor to the power source.

4. Press the Menu button on your monitor to access the on-screen menu.

5. Use the arrow keys to navigate to the “Settings” or “Setup” menu.

6. Use the arrow keys to select “Factory Reset” or “Default.”

7. Press the “Enter” or “OK” button to confirm.

8. The monitor will restart and display the factory settings.

Note: The exact steps may vary depending on the model of your HP monitor. It is recommended to consult the user manual that came with your monitor for detailed instructions.

How Do I Update The Firmware On My Hp Monitor?

Updating the firmware on your HP monitor is a quick and easy process. Here are the steps:

1. Go to the HP website and download the latest firmware for your monitor.

2. Connect your monitor to your computer using a VGA or HDMI cable.

3. Turn on your monitor and wait for it to boot up.

How Do I Connect My Laptop To My Hp Monitor Using Hdmi?

To connect your laptop to your HP monitor using HDMI, follow these steps:

1. First, identify the HDMI ports on your laptop and HP monitor. The HDMI ports are typically located on the back or side of the devices.

2. Next, get an HDMI cable. Make sure the cable is long enough to reach from the laptop to the monitor.

3. Connect one end of the HDMI cable to the HDMI port on your laptop and the other end to the HDMI port on your HP monitor.

4. Once the cable is connected, switch on the monitor and the laptop.

5. On your laptop, go to the display settings. Look for an option that says “Multiple Displays” or “Display Settings.”

6. In the display settings, you should see an option that says “Detect Displays.” Click on it.

7. Your laptop should detect the HP monitor. If it doesn’t, try restarting the laptop and the monitor.

8. Once the laptop detects the monitor, you should be able to see the extended desktop on your laptop. You can now use both the laptop and the monitor as an extended desktop.

Note: If you’re using a Mac, the HDMI port may be labeled “Thunderbolt” or “Thunderbolt 2.

Final Note

In conclusion, the “HDMI INInactive input signal not found” error is a common issue that affects HP monitors. While it can be annoying, there are several solutions you can try to fix the issue. First, make sure that your HDMI cable is secure and plugged in properly. If that doesn’t work, try updating the firmware on your monitor or changing the input resolution. If all else fails, you may need to contact HP customer support for further assistance.

Alex Wilson

My name is Alex Wilson, and I am the founder and lead editor of CyberTechnoSys.com. As a lifelong tech enthusiast, I have a deep passion for the ever-evolving world of wearable technology.
Back to top button