What To Know
- After spending a few bucks on purchasing the Mi Band 3, it can be quite frustrating if the device starts to show problems like unresponsive touch.
- If restarting the device and cleaning the screen doesn’t fix the issue, you can try a factory reset.
- Sometimes, the issue might be due to a bug in the Mi Fit app, and updating the app might fix it.
It’s frustrating when your Mi Band 3 stops responding to your touch. You try to tap the screen, but nothing happens. The display stays black, and the band doesn’t do anything.
There are several reasons why your Mi Band 3 might not be responding to touch. It could be that the band’s battery is dead, or it could be that the band’s firmware is out of date.
To fix this issue, you can try charging your Mi Band 3. If that doesn’t work, you can try updating the firmware on your Mi Band 3.
Mi Band 3 Not Responding To Touch
After spending a few bucks on purchasing the Mi Band 3, it can be quite frustrating if the device starts to show problems like unresponsive touch. According to several users, the Mi Band 3 tends to not respond to touch sometimes.
This Mi Band 3 unresponsive touch issue seems to be a common problem, and many users have faced it. However, the good news is that you can fix this touch issue by following some troubleshooting steps.
In this article, we’ll discuss some solutions that you can try to fix Mi Band 3 not responding to touch issue.
Steps to fix Mi Band 3 not responding to touch issue
Restart the device
Sometimes, the issue might be just a temporary glitch, and a simple restart can fix it. To restart your Mi Band 3, follow these steps:
Press and hold the button on your Mi Band 3 for 2 seconds.
When the screen goes blank, release the button.
Wait for the device to restart.
Check the touchscreen
If your Mi Band 3 is not responding to touch, it could be due to the touchscreen. To check if the touchscreen is faulty, follow these steps:
Clean the screen with a soft, dry cloth.
Press the touchscreen with your finger.
If the screen responds, the touchscreen is not faulty.
If the screen still doesn’t respond, the touchscreen might be faulty.
Factory reset
If restarting the device and cleaning the screen doesn’t fix the issue, you can try a factory reset. Here’s how to factory reset your Mi Band 3:
Open the Mi Fit app on your phone.
Go to “Profile” and select “Mi Band 3.”
Tap on “Factory reset.”
Follow the on-screen instructions to complete the process.
After resetting the device, set it up again and see if the touch issue is resolved.
Update the app
Another solution that you can try is updating the Mi Fit app. Sometimes, the issue might be due to a bug in the Mi Fit app, and updating the app might fix it.
How Do I Fix My Mi Band 3 Touch Screen Not Working?
- 1. Try restarting your Mi Band 3.
- 2. Clean the screen with a soft cloth to remove any dirt or debris.
- 3. Make sure the battery is charged.
- 4. Update the firmware of your Mi Band 3.
- 5. Contact customer support for further assistance.
What Are The Potential Causes Of My Mi Band 3 Touch Screen Not Working?
A Mi Band 3 touch screen not working is a common problem faced by many users. There are several potential causes for this issue, and here are some troubleshooting steps you can try to fix it:
1. Restart your Mi Band 3: Sometimes, a simple restart can fix the problem. Press and hold the button on your Mi Band 3 for 10 seconds to restart it.
2. Check the touch screen sensitivity: If the touch screen sensitivity is too low, it may be difficult for the device to register your touch. To increase the sensitivity, go to Settings > Device settings > Touch screen sensitivity and select a higher sensitivity level.
3. Clean the touch screen: The touch screen may become dirty or dusty over time, which can affect its sensitivity. Use a soft cloth to clean the touch screen gently.
4. Check the charging cable: The charging cable may be damaged or not compatible with your Mi Band 3. Try using a different charging cable to see if the issue is resolved.
5. Update the firmware: The Mi Band 3’s firmware may be outdated, which can cause various issues. To update the firmware, connect your Mi Band 3 to your smartphone, open the Mi Fit app, and follow the instructions to update the firmware.
6. Reset your Mi Band 3: If none of the above steps work, you can try resetting your Mi Band 3. This will erase all settings and data on the device, so make sure to back up your data before proceeding. To reset your Mi Band 3, press and hold the button for 10 seconds until the screen goes blank. Then, press and hold the button again until the Mi Band 3 vibrates.
What Are The Possible Solutions If My Mi Band 3 Touch Screen Stops Working?
There are several possible troubleshooting steps to try if your Mi Band 3 touch screen stops working.
1. Restart your Mi Band 3: Hold down the power button until the device turns off, and then turn it back on.
2. Check the touch screen sensitivity settings: Open the Mi Fit app on your phone, go to the “Profile” tab, and tap on the “Mi Band 3” device. Then, tap on “Settings” and “Touch screen sensitivity” to adjust the sensitivity.
3. Clean the touch screen: Use a soft cloth or cotton swab to gently clean the touch screen of any dirt or debris that may be affecting its responsiveness.
4. Check the Mi Fit app for updates: Open the Mi Fit app on your phone, go to the “Profile” tab, and tap on the “Mi Band 3” device. Then, tap on “Update” to see if there’s a new firmware update available.
5. Reset your Mi Band 3: If none of the above steps work, you can try resetting your Mi Band 3.
How Do I Reset My Mi Band 3 Touch Screen?
To reset your Mi Band 3 touch screen, you will need to remove the device from your wrist and hold down the button on the side of the device for a few seconds. Once the screen turns off, you can press the button again to turn the device back on. You may need to repeat this process a few times before the touch screen starts working again.
If the problem persists, you can try the following steps:
1. Uninstall the Mi Fit app from your phone and reinstall it.
2. Restart your phone.
3. Try connecting the Mi Band 3 to a different phone.
4. Try connecting the Mi Band 3 to a different Bluetooth device.
5. If none of the above steps work, you may need to contact Mi customer service for further assistance.
What Are The Common Problems With The Mi Band 3 Touch Screen?
The Mi Band 3 is a fitness tracker that comes with a touch screen display. However, some users have reported a few common problems with the touch screen. Here are some common problems and solutions:
Problem 1: Touch screen not responding
Solution: Clean the screen with a soft cloth or cotton swab to remove any dirt or debris that may be interfering with the touch screen.
Problem 2: Touch screen not registering taps
Solution: Check to ensure that the touch screen is not frozen. If the touch screen is frozen, try restarting the fitness tracker by pressing and holding the Power button for 10 seconds.
Problem 3: Touch screen is unresponsive in cold weather
Solution: In cold weather, the touch screen may become less responsive. Try warming the fitness tracker in your hand for a few minutes before using it.
Problem 4: Touch screen is unresponsive after swimming
Solution: After swimming, the touch screen may become less responsive due to water residue. Try cleaning the touch screen with a soft cloth or cotton swab to remove any water residue.
Problem 5: Touch screen is unresponsive after using hand sanitizer
Solution: Hand sanitizer can cause the touch screen to become less responsive.
Wrap-Up
In conclusion, the Xiaomi Mi Band 3 is a great fitness tracker, but some users have been complaining about unresponsiveness to touch. If you are experiencing this issue, try restarting your device and updating the firmware. If the problem persists, contact customer service for further assistance.
