Mi Band 4 Swimming Not Working? Here’s The Solution!

If you’re finding your Mi Band 4 swimming not working, you’re not alone. Many users have reported problems with tracking their swims with the device. However, there are a few things you can do to try and fix the problem. First, make sure you have the latest version of the Mi Fit app. This can help fix any bugs that may be causing the problem. Next, try restarting your phone and Mi Band 4. Sometimes, this can help fix any connectivity issues that may be causing the swimming tracking problem. Finally, try resetting your Mi Band 4. To do this, press and hold the button on the device for about 10 seconds. This should reset the device and allow you to pair it again with the Mi Fit app.

Mi Band 4 Swimming Not Working

If your Mi Band 4 is not tracking your swimming activity, don’t worry, you are not alone. This is a common issue faced by many Mi Band 4 users.

Here’s what you can do to fix the issue:

1. Check if the Mi Band 4 is waterproof: The Mi Band 4 is waterproof up to 50 meters, but it may not work properly in water that is too deep or too cold.

2. Clean the charging contacts: The charging contacts on the Mi Band 4 can become dirty and prevent the tracker from charging properly. Clean the contacts with a dry cloth or cotton swab.

3. Check the battery level: If the battery level is low, the Mi Band 4 may not be able to track your swimming activity. Charge the tracker for at least 2 hours and try again.

4. Check the firmware version: The Mi Band 4 comes with the latest firmware version installed, but you can check the firmware version in the Mi Fit app. If the firmware version is not up to date, update it and try again.

5. Check the Mi Fit app: The Mi Fit app is responsible for tracking your swimming activity. Make sure you have the latest version of the app installed and that you have enabled swimming tracking in the settings.

6. Restart the Mi Band 4: Sometimes, restarting the Mi Band 4 can fix the issue. To do this, press and hold the button on the side of the tracker for about 10 seconds.

If none of these solutions work, you may need to contact Mi customer support for further assistance.

Why Is My Mi Band 4 Not Tracking My Swimming Activity Accurately?

• 1. Make sure your Mi Band 4 is securely fastened to your wrist.
• 2. Check that the band is not too tight, as this can prevent the tracker from tracking your movements accurately.
• 3. Make sure you are swimming in a well-lit area, as the tracker uses light to track your movements.
• 4. Try swimming in a different pool or body of water, as the tracker may be having trouble tracking your movements because of the chemicals or temperature of the water.
• 5. If none of the above solutions work, try resetting your Mi Band 4 and trying again.

How Do I Calibrate My Mi Band 4 To Track Swimming More Accurately?

Mi Band 4 is an excellent fitness tracker, but some users have reported issues with tracking swimming accurately. In this article, we’ll show you how to calibrate your Mi Band 4 to track swimming more accurately.

First, you’ll need to find a pool or body of water that you can use for swimming. Next, you’ll need to enter the pool and start swimming. As you swim, you’ll need to pay close attention to your Mi Band 4.

Once you’ve finished swimming, you’ll need to dry off your Mi Band 4. Then, you’ll need to enter the pool again and start swimming. As you swim, you’ll need to pay close attention to your Mi Band 4.

How Do I Fix My Mi Band 4 Swimming Tracking If It Is Not Working?

If your Mi Band 4 swimming tracking is not working, there are a few troubleshooting steps you can take to try and resolve the issue. First, make sure that your Mi Band 4 is firmly secured to your wrist and that your skin is dry before putting it on. This will help prevent any moisture from interfering with the sensors and preventing accurate tracking.

Next, try restarting your Mi Band 4. To do this, press and hold the button on your Mi Band 4 for about 10 seconds until the screen turns off. Then press and hold the button again to turn the device back on.

If restarting your Mi Band 4 does not resolve the issue, you can try resetting the device to its factory settings. To do this, press and hold the button on your Mi Band 4 for about 10 seconds until the screen turns off. Then press and hold the button again until the Mi logo appears on the screen.

If none of these steps work, it’s possible that there may be an issue with your Mi Band 4’s hardware. In this case, you may need to contact Xiaomi customer support for assistance.

How Do I Reset My Mi Band 4 Swimming Tracking If It Is Not Working?

If your Mi Band 4 swimming tracking is not working, you can try the following methods to fix the issue:

1. Restart your Mi Band 4: Press and hold the touch button for about 10 seconds until the screen turns off. Then press and hold the touch button again until the Mi Band 4 turns on.

2. Check the swimming tracking settings: Open the Mi Fit app on your phone, go to “Profile” > “Mi Band 4” > “Swimming tracking” and make sure it’s turned on.

3. Check your Mi Fit app version: Make sure your Mi Fit app is up to date. You can check for updates in the App Store or Google Play Store.

4. Clear the app’s cache: Go to your phone’s settings, find the Mi Fit app, and clear its cache.

5. Check your Bluetooth connection: Make sure your phone’s Bluetooth is turned on and connected to the Mi Band 4.

6. Try resetting your Mi Band 4: If none of the above methods work, you can try resetting your Mi Band 4. To do this, press and hold the touch button for about 10 seconds until the screen turns off.

How Do I Update My Mi Band 4 Firmware To Fix Swimming Tracking Issues?

To update your Mi Band 4 firmware to fix swimming tracking issues, follow these steps:

1. Connect your Mi Band 4 to your phone via Bluetooth.

2. Download the Mi Fit app on your phone from the Google Play Store or Apple App Store.

3. Open the Mi Fit app and tap on the “Profile” tab.

4. Scroll down and tap on the “Mi Band 4” option.

5. Tap on the “Update” button to start updating the firmware.

6. Wait for the update to finish, and then restart your Mi Band 4.

7. After the restart, try swimming again and see if the tracking issues have been fixed.

Note: If your Mi Band 4 is out of warranty, you may need to pay a small fee for the firmware update.

Takeaways

Mi Band 4 swimming not working is a common issue for many users. If this is your case, try resetting the device, updating the app, or checking for any water damage. If none of these solutions work, you may need to contact customer support for further assistance.